Office chair pad – Whether or not the chair cushion is original is the chair, the average chair will enjoy a different look with this simple chair accessory. Office chair pad will have at least two looks. And whose chair cushion is made as a reversible device, the chair has three different looks. In today’s consumer driven market of cheap imports many times can be bought new chair cushions only foam the effort and then extracted with fabric bought by the yard to coordinate with the overall decor
Ideas for restore office chair pad. Remove all items from the work desk, which are not required. Lay the fabric on the worktop. Fold the fabric in half with the right sides together. Strip the foam off the chair pillow of any fabric; be careful not to damage the foam. Place foam on the fabric close to the joint edge. Use tailor-made chalk to draw a pattern of foam while holding the foam in place with a free hand. Put the foam side for later use. Pin the fabric together along the chalk line.
Adjust the setting temperature of iron to moderate heat. Sew the zigzag stitch close to the rice. Use a scissors to trim close to the outer edge of zigzag stitch. Use the tip of hot iron to press along the basting line. Wait while the fabric cools, remove the legs and then turn the pad cover outwards. Use the tip of iron and press the sewing line machine sewing. Leave the pillow cover cool. Fold the foam in half with one hand and with the free hand open pad cover. Place foam inside the cover. Push the foam into all sides of the cover. Fold an inch of fabric into the interior of the office chair pad cover and close 18 inch opening with hand or machine sewing.